1. The long-term operation of the pulverizer should be fixed on the indoor cement floor. If the work location is changed frequently, the pulverizer and the motor should be mounted on the base made of angle iron. If the pulverizer is powered by a diesel engine or mounted on the body of a small four-wheel tractor, the power of the pulverizer should be matched. Even if the power of the diesel engine is slightly larger than the power of the pulverizer, the pulley grooves of the two must be aligned, and the outer end faces of the pulleys are on the same plane. Whether the pulverizer is designed in the front or rear of the small four-wheel, the fixing should be stable, and the protective part of the leather transmission part should be provided.
2. After the pulverizer is installed, check the fastening condition of each part of the fastener. If it is loose, it must be tightened.
3. Check if the belt tightness is appropriate and whether the motor shaft and the pulverizer shaft are parallel.
4. Before starting the pulverizer, first turn the pulley or runner by hand to check whether the teeth, hammer and runner are flexible and reliable, whether there is collision in the shell, and whether the rotation of the runner is in the direction indicated by the arrow on the machine. Consistent, the body lubrication is good.
5. Do not change the pulley at will, in case the rotation speed is too high, the explosion chamber will explode, or the rotation speed will be too low, which will affect the working efficiency.
6. After the pulverizer starts, it will be idling for 2-3 minutes. After there is no abnormal phenomenon, it will be used again.
7, at work should pay attention to the operation of the pulverizer at all times, the feeding should be even, to prevent blocking the car, do not overload the machine for a long time. If vibration, noise, high temperature of the bearing and the body, and external spraying are found, stop the machine immediately and continue working after troubleshooting.
8. Check the materials carefully before smashing to prevent the hard objects such as copper and iron blocks from entering the crushing chamber, causing accidents and damage to the parts.
9. The operator should not wear gloves. When feeding, stand on the side of the crusher to prevent rebounding debris and particles from hurting the face.
10. When clogging, it is strictly forbidden to forcibly feed or tow the feed by hand or wooden stick. After the power is turned off, the material fed into the room is cleared and then worked.
Rice Transplanter is a kind of agricultural machinery for planting rice seedlings in rice fields. When planting, first take out several rice seedlings from the seedbed with mechanical claws and plant them into the soil in the field. In order to keep the angle between the seedbed and the ground at right angles, the front end of the mechanical claws must adopt an elliptical action curve when moving. The action is accomplished by means of a planetary mechanism of rotating or deforming gears, and the forward engine can drive these action machines at the same time. The rice transplanter must have non-slip wheels and floating design to travel on the soil. If the transplanted seedlings are in pieces, the rice seedlings are taken out from a specific seedling box and planted mechanically.
Walking Transplanter,Walking Farm Transplanter,4 Rows Walking Transplanter,Walking Type Rice Transplanter
Taizhou Yingtian Agricultural Machinery Manufacturing Co., Ltd. , https://www.sakuradaagc.com