How to install the swing screen

The Jinhe brand swinging screen is a kind of artificial vibrating screen. Since the swinging screen has higher precision and higher output, more and more industries are using the swing screen. How to install the swing screen?

1. Install the support or hanging device. When installing the rocking screen, level the foundation, and then install the components in order according to the parts drawing of the support or suspension device and the installation drawing of the sieve. Before the spring is installed, it should be selected according to the actual stiffness value marked on the end face.

2. Connect the screen box to the support or suspension device. After the rocking screen is installed, it should be adjusted according to the specified inclination angle. For hanging screens, the screen box inclination and the level of the screen box spindle should be adjusted at the same time. Generally, the horizontal level is adjusted first to eliminate the deflection of the screen box. After the horizontal correction, adjust the longitudinal inclination of the screen box. The force of the vibration isolation spring should be uniform, and the force can be judged by measuring the compression of the spring. Generally, the compression of the two sets of springs at the feed end must be the same, as should the two sets of springs at the discharge end. The amount of spring compression at the discharge end and the feed end can vary.

3. Install the motor and triangular tape of the swing screen. When installing, the foundation of the motor should be leveled, the level of the motor needs to be corrected, the center line of the corresponding groove of the two tape wheels should coincide, and the tension of the triangular tape should be appropriate.

4. Install and fix the swing screen surface as required.

5. Check the fixing condition of each connecting component of the swing screen, such as sieve plate, vibration exciter, etc., and the screen should be evenly tensioned to prevent local vibration. Check the lubrication of the transmission part, the wiring of the motor and the control box is correct, and turn the transmission part by hand to see if the operation is normal.

6. Check whether the feeding of the rocking sieve, the discharge chute and the sieve funnel have no collision during work.