Beverage packaging machine installation precautions

Liquid products are not only widely available, but also in large quantities, which are indispensable in people's lives, including beverages, drinks, liquid medicine, vinegar, oil, shampoo and so on. In the face of huge market, liquid packaging machine has made great progress and development. Through the integration of automated technology, advanced liquid automatic packaging machine has been introduced in the market.
First, the use and maintenance of liquid packaging machine
1. Because the small liquid packaging machine is an automatic machine, the size of the easy-open bottle, the bottle pad and the cap are required to be uniform.
2. Before driving, you must first use the rocker to turn the machine to see if it is abnormal. It is true that you can drive again.
3. When adjusting the machine, the tool should be used properly. It is strictly forbidden to use excessive tools or excessive force to remove the parts to avoid damage to the machine or affect the performance of the machine.
4. When the machine is adjusted, be sure to tighten the loose screws. Rotate the machine with the rocker to see if the motion meets the requirements before driving.
5. The machine must be kept clean. It is strictly forbidden to have oil, liquid or glass debris on the machine to avoid damage to the machine. Therefore, it must:
(1) The machine removes the liquid or glass debris in time during the production process.
(2) Clean all parts of the machine surface before shifting, and add clean lubricating oil to each activity department.
(3) It should be scrubbed once a week, especially in places that are not easily cleaned in normal use or blown off with compressed air.
Second, liquid packaging machine installation precautions
1. After the machine is out of the box, first check whether the random technical data is complete, and whether the machine is damaged during transportation, so as to solve it in time.
2. Install and adjust the feeding assembly and the discharging assembly according to the outline drawing in this manual.
3. Add new lubricant to each lubrication point.
4. Turn the machine with the rocker to check if the machine is running in the right direction (counterclockwise in the direction of the motor shaft). The machine must be protected from grounding.
If you need it, we will provide you with the ideal equipment, and we also welcome the vast number of users to visit the company, we will tailor it according to your specific needs, welcome your guidance.

Virus Specimen Collection Tube

Inspection principle:
It can perform protein denaturation on fresh clinical virus samples to inactivate the virus, prevent secondary transmission of infection, and ensure the safety of transportation and testing personnel.
♣.Structural composition: Combination of cotton swab and transport medium (VTM).
♣. Product requirements:
The product should be airtight, avoid high temperature, avoid direct sunlight storage. It should be used in a clean, hygienic, pollution-free, and temperature-friendly environment.
♣, Storage conditions and validity period:
â‘ , the product should be stored in a clean, dry and ventilated environment,
②, the temperature is 5℃-35℃;
â‘¢, relative humidity <85%RH;
â‘£, product shelf life: 12 months.
♣. How to use
â‘  Before sampling, mark relevant information on the label of the sampling tube.
â‘¡. Sampling with the corresponding cotton swabs.
â‘¢ After the collection is completed, quickly put the cotton swab into the collection tube, break the part higher than the sampling tube, and tighten the tube cover.
â‘£. For the specific sampling method, please refer to the following:
a) Nasal swab Gently insert the sampling head into the nasal cavity, stop for a while and then slowly rotate to exit, immerse the collected specimen in the Xiangxiang solution, break the excess part and discard it, and tighten the sampling tube cover.
b) Pharyngeal swab: Wipe bilateral pharyngeal tonsils and posterior pharyngeal wall with the sampling head, immerse the collected specimen in the sampling solution, break off the excess part and discard it, and tighten the cap of the sampling tube.
c), Mycoplasma Chlamydia, Ureaplasma specimen collection
Male: Insert the sampling head into the urethra about 2cm and rotate, stay for a while and then exit, and immerse the collected specimen in the sampling solution.
Female: Wipe the mucus of the cervical orifice, insert the sampling tip into the cervical canal for 1-2 cm for sampling, immerse the collected specimen in the sampling solution, break off the excess part and discard it, and tighten the cap of the sampling tube.
♣. Precautions
1. After the virus is collected, the disposable sampling swab should be completely inserted into the preservation solution, so that the virus can be retained to the greatest extent possible.
â‘¡ The collected specimens must be sent for inspection in time.
â‘¢. It is forbidden to use products with damaged packaging and expired validity period to prevent pollution.
This single-use Virus Sampling Tube is used for in vitro diagnosis. It cannot be used for human or animal oral or external use. If swallowed, it may cause serious events; it is irritating to eyes and skin. If it is not splashed into the eyes, rinse with water.

Virus Sampling Tube,Virus Specimen Collection Tube,Viral Transport Tube,Saliva Virus Sampling Kit

Jilin Sinoscience Technology Co. LTD , https://www.jilinsinoscience.com