Stirrer safety and maintenance matters

Stirrer security and maintenance issues

1. The power socket of the instrument must have a reliable bottom line to ensure safe use. The instrument should be placed in a room with a relative humidity of no more than 85%.

2. Stir the solution page so that 70% of the mouth of the container is suitable, and the rotation speed should not be too fast to prevent the corrosive liquid from splashing out. The shape and size of the stirrer should match the size of the container and the amount of solution.

3. Place the solution containing the solution and the stirrer in the middle of the stirrer container, and then adjust the required stirring speed from the minimum slowly to prevent the step.

4. To measure the body fluid temperature with a thermometer or temperature sensor, insert the thermometer or temperature sensor into the proper position of the liquid surface, not too deep, to prevent damage caused by the stirrer.

5. When setting the temperature, it is recommended that the general accident setting can be set at 70%-80% of the working temperature. °C is set to the working temperature after reaching the steady state.

6. Do not dry the heating plates of each type of stirrer. When the heating plate is heated. Do not touch directly with your hands to prevent burns. After use, please unplug the power cord to ensure safety.

Pay more attention to the above matters in the work to ensure the safety of the experiment. Protect the equipment from use.