The correct operation method of the electronic tension machine if it is not used for a long time

The electronic tensile machine is used to mechanically force the experimental analysis data of the mechanical properties of the material such as static load, tensile, compression, bending, shearing and peeling to obtain a qualified international standard data. It is an industrial and mining enterprise and a research institute. Ideal testing equipment for departments, colleges and universities, commodity inspection and arbitration, and technical supervision.

Electronic tensile machine can be widely used to detect stripping, tearing, bonding and opening force of wires, cables, food, aluminum-plastic tubes, film, paper, machinery manufacturing, ceramics, pharmaceutical packaging, geotextiles, wood, metal materials and other products. Mechanical properties such as stretching, deformation, heat sealing, puncture force, and pulling force. In the process of use, the gear must be lubricated. It is necessary to avoid the drying of the moving joints. When the time is long, the wear and tear will be increased. Excessive oil addition will also stick a lot of dust, so it is essential to ensure the cleanliness of the operating room of the electronic tension machine.

If there is a long time after the electronic tension machine is not used, turn off the computer and pull out the measurement and control card. The interfaces on the controller have a one-to-one correspondence. Inserting the wrong interface may cause damage to the device. The interface on the pluggable controller must be powered off. According to the use of the machine and the service life of the oil, regularly change the oil suction filter and filter element, replace the hydraulic oil, and regularly check whether there is oil leakage at the main machine and the oil source. If there is any oil leakage, replace the seal ring or combination in time. pad.

Jiangsu Tianhui Testing Machinery Co., Ltd. is a professional service manufacturer engaged in material testing and testing equipment. It integrates R&D, design, production, sales and service, and provides solutions for material testing and finished product testing .