Bamboo shoots sterilization machine use notes simple instructions

Bamboo shoot sterilization machine equipment precautions and maintenance knowledge

Things to check before the equipment is in operation: In order to ensure safe and smooth operation, it is very important to check before each operation. It is necessary to check the items one by one before starting work.

1. Check the switch box: Make sure that the power cord of the no-fuse switch is loose, and the looseness must be tightened.

2. Check the electrical appliances and motors regularly. Also, the fans are not working properly. Note: Please check the electrical power to turn off the total power to avoid electric shock. Check the electrical equipment to avoid unnecessary damage and danger.

3. Confirmation and adjustment of the tension of the chain and mesh belt of each department.

4. Look at the motor reversing, and the motor cooling fan is reversing. If the cooling air is reversed, please change the cooling fan line on the lower terminal of the distribution box. The motor reverses the motor line below the terminal. One change. If you replace the motor or replace the pump, please pay attention to the positive and negative rotation of the motor and the pump and the reverse rotation of the cooling fan. If reverse, change the two ends of the cooling fan terminal in the distribution box. If the motor is not replaced after the motor is replaced, the motor cooling fan is reversed and the cooling fan is reversed, resulting in loss of the motor due to poor heat dissipation.

Bamboo shoots sterilizing machine according to the size and packaging requirements, sterilization temperature and sterilization time is different, the details of the device are not exactly the same, we will design and processing according to the customer's specific situation.