Major daily maintenance
1. Clean the chiller sink. Open the drain valve and rinse it with tap water. If there is a lot of dust or debris, remove it and rinse it with tap water.
2. Clean the evaporation filter, the wet curtain. Remove the wet curtain and rinse it with tap water. If the wet curtain has difficult-to-wash material, it can be soaked with tap water first, and then the air-conditioner cleaning liquid is sprayed on the wet curtain. After the cleansing solution completely soaks the wet curtain for 5 minutes, Rinse with tap water until the impurities on the wet curtain are removed.
3. The maintenance of the wet curtain air cooler when it is not used for a long time. First close the chiller water source valve, remove the wet curtain, drain the water in the sink, and thoroughly clean the chiller sink. After the cleaning is completed, replace the wet curtain, turn on the cooling fan, and send the air for 5 minutes to 8 minutes. After the wet curtain is dried, the total power of the cooling fan can be turned off.
4. Removal of odor. After the wet curtain air cooler is used for a period of time, if the cold air blower is not cleaned and maintained, the cold air sent by the cold air blower may have an odor. In this case, it is only necessary to clean the chiller wet curtain and the water tank according to the above step 2; if still Odor, can be in the case of boot, add some chlorine disinfectant to the chiller sink, so that disinfectant fully saturated wet curtains and coolers in every corner, so repeated disinfection several times, you can go to the cooler odor.
Maintenance precautions
1. When cleaning the wet curtain air blower, the main power of the air blower must be completely disconnected, and the “maintenance, no use†sign should be hung at the control switch to prevent anyone from accidentally turning on the switch and causing danger.
2. When cleaning the wet curtain air blower, be careful to remove the wet curtain. When flushing, the water pressure should not be too high, so as not to damage the wet curtain, and not to put any corrosive chemicals, so as to avoid corrosion of the wet curtain.
3. Safety belts must be fastened when working at height.
Acidity regulators are mainly used to regulate the flavor of foods, and can also serve as preservatives, antioxidants, buffering and other functions.
Our company provide acidity regulators for many food additives, including citric acid, sodium citrate, potassium citrate, lactic acid, malic acid and tartaric acid. In addition to food acidity regulation, can also be used for fine chemical industry, pharmaceutical industry, etc.
Acidity Regulator,Beverage Acidity Regulator,Acidity Regulator Potassium Citrate,High Class Acidity Regulator
Allied Extracts Solutions , https://www.alliedbiosolutions.com