Advantages of rubber and plastic insulation pipe in installation
Rubber-plastic composite aluminum foil: mainly used for the surface of new rubber-plastic composite insulation materials. The use of aluminum foil composite technology makes it better in moisture resistance. Composite high-strength aluminum foil delays the aging of materials and completely avoids the cracking of rubber and plastic materials. Defects greatly increase the service life of the material. Moreover, the non-combustible aluminum foil is externally attached, which further improves the fireproof performance of the thermal insulation layer. The inner material of the composite material and the rubber material are synchronously bonded during foaming, and no additional adhesive is needed, which not only avoids the pollution caused by the adhesive, but also has the adhesive strength. (1) Green environmental protection: no atmosphere Harmful chlorofluoride meets ISO14000 international environmental certification requirements, so it will not produce any harmful pollutants during installation and application.
(2) Low thermal conductivity: Rubber sponge is a high-quality thermal insulation material. It is a nemesis that is cold, heat-insulating and anti-condensation. It has a low heat transfer coefficient and remains stable, and it has an insulating effect on any heat medium.
Advantages of rubber and plastic insulation pipe in installation
(3) Good fire performance: rubber and plastic materials meet the national standard GB8624 "Building Materials Combustion Performance Analysis Method" and have been tested as GB8624B1 grade flame retardant materials.
(4) Closed-bubble structure: The rubber-plastic sponge is a closed-bubble structure. The water in the outside air is difficult to penetrate into the material. It has excellent resistance to water vapor permeation, and it is not necessary to add a vapor barrier layer to the surface of the cold insulation layer. The wet resistance factor μ of rubber and plastic is greater than 3500 (ISO9346). It forms a built-in waterproof vapor layer, even if the product is scratched, it will not affect the overall vapor barrier. That is, the insulation layer is also a moisture barrier layer.
(5) The use of thin materials and space-saving thickness is reduced by about two-thirds compared with other insulation materials. Therefore, the space above the ceiling of the floor can be saved, and the indoor height can be improved.
(6) Long service life, excellent weather resistance, anti-aging, anti-cold, anti-inflammatory, anti-dry, anti-humidity, anti-ultraviolet, ozone-resistant, twenty-five years old, no deformation, no maintenance life And other characteristics.
(7) The appearance is high-grade, uniform and beautiful, with high elasticity and smooth surface layer. The texture is soft. Even if it is installed on irregular parts such as elbows, tees, valves, etc., it can be kept intact and beautiful, and the appearance does not need to be decorated, even if it is not suspended. Can maintain high-end.
(8) Easy and fast installation Because the material is soft and there is no need for other auxiliary layers, the construction and installation are simple. For the installation of the pipeline, it can be put together with the progress of the pipeline installation. The rubber and plastic pipe can be cut open and then glued with special glue. Can be combined
Advantages of rubber and plastic insulation pipe in installation 
Sanitary Butt Welding Tee,Stainless Steel Butt Weld Tee,Stainless Steel Welding Y Type Tee,Sanitary Pipe Fittings
Wenzhou Gaoya Light Industry Machinery Co.,ltd. , https://www.hongyafitting.com